User Manual Q&AAnswer
Feb 20, 2025 - 10:52 PM
To connect the Headload Prodigy to your guitar amp and speaker cabinet, follow these steps:
1. Make sure your guitar amp is turned off and the audio system is either turned down or volume levels turned off.
2. Connect the output from your amp to the Prodigy's FROM AMP ¼" input.
3. Connect the 100% output from the Prodigy to your speaker cabinet.
4. Connect the XLR output from the Prodigy to the PA mixer or recording preamp.
5. Connect the power adaptor to the Prodigy to turn it on (there is no power switch).
6. Power up your amp and slowly increase the volume.
It is important to use heavy 14-gauge speaker wires (or heavier if possible) between the Headload Prodigy and your amplifier to ensure optimal signal flow from the head to the speaker cabinet.
Add New Comment