How do I properly install the SATCO Overtop 10W LED Large Wall Lantern? (SATCO Overtop 10W LED Wall Lantern User Guide)

Answer

manuals.plus

Feb 20, 2025 - 10:41 PM

To properly install the SATCO Overtop 10W LED Large Wall Lantern, follow these steps:

1. Attach the mounting plate (C) to the outlet box using the provided mounting screws (D). Ensure that the ground wire faces out.

2. Put the decorative arm (G) back onto the fixture, making sure that the end of the arm (G) is fixed to the fixture bottom xxxx (K). Secure it with the provided Hex xxxx (H) using the Allen wrench (I) provided.

3. Grounding Instructions:
- Insert the green grounding xxxx into the hole with two raised dimples on the mounting bar.
- If the fixture has a ground wire, wrap it around the green grounding xxxx and connect it to the ground wire from the outlet box using a wire connector (not supplied).
- If the fixture does not have a ground wire, wrap the ground wire from the outlet box around the green grounding xxxx and tighten it. Never connect the ground wire to black or white power supply wires.

4. Connect the wires:
- Identify the color of the wires on your fixture and group them accordingly.
- Take the fixture wire(s) from group A and place them evenly against the black wire from the outlet box. Do not twist the wires together before using wire connectors.
- Fit a wire connector over the wires and xxxx it clockwise until firm.
- Gently try to pull the connector off the wires. If it comes off, redo steps 3 and 4 and check for a firm connection.
- Connect the fixture wire from group B to the white wire from the outlet box using the same method. Ensure no bare wires are visible outside the wire connectors.

5. Final Assembly:
- Align the fixture back plate (F) to the mounting plate (C) and secure it with the provided washer (E) and screws (B).
- To prevent moisture from entering the outlet box, use clear caulking (e.g., Indoor/Outdoor Silicone Sealant) to outline the outside of the fixture back plate where it meets the wall, leaving a space at the bottom for moisture to escape.

Please refer to the provided user guide for more detailed instructions and illustrations.