User Manual Q&AAnswer
Feb 20, 2025 - 10:29 PM
To set up the tp-link tapo Smart WiFi Power Strip, follow these steps:
1. Download the Tapo app from the App Store or Google Play.
2. Open the Tapo app and create an account if you don't have one.
3. Connect your phone to a 2.4GHz Wi-Fi network.
4. Plug in the power strip and make sure the LED indicator is blinking rapidly.
5. In the Tapo app, tap the "+" icon to add a new device.
6. Select "Smart Plug" and follow the on-screen instructions to connect the power strip to your Wi-Fi network.
7. Once connected, you can give your power strip a name and customize its settings in the Tapo app.
If you encounter any issues during the setup process, such as the power strip failing to add to your home, you can try resetting the power strip by pressing and holding the power button for at least 10 seconds. After resetting, restart your phone and try the setup process again. For more detailed troubleshooting instructions, you can refer to the troubleshooting guide provided by TP-Link at https://www.tp-link.com/support/faq/3...
Please note that the supported load types for the EU/FR/AU version of the power strip are 100-240Vac, 50/60Hz, with a maximum resistive load of 10A and a motor load of 1.6FLA/10LRA. Make sure to check the specifications and requirements for your specific region.
For further assistance, warranty information, and technical support, you can visit the TP-Link support website at https://www.tapo.com/support/.
Add New Comment