How do I install the Bojano LMGC Series LED Illuminated Aluminum Cabinets? (Bojano LMGC Series LED Aluminum Cabinets Installation Guide)

Answer

manuals.plus

Feb 20, 2025 - 10:27 PM


Installation of the Bojano LMGC Series LED Illuminated Aluminum Cabinets requires the following steps:

1. Switch off the electrical supply at the mains before beginning.
2. Use the provided template to mark the wall with a pencil.
3. Ensure that the mirror cabinet is level and check for hidden pipes or cables before drilling.
4. Drill 4 holes using a 6mm drill bit and fix the wall plugs and screws in place, leaving the end of the  xxxx  head protruding from the wall.
5. Make the electrical connections in accordance with current IEE wiring regulations. If in doubt, consult your electrician.
6. Carefully hang the mirror cabinet.
7. Switch on the mirror lights.

Please note that all fittings must be installed by a trained professional. It is important to switch off the electrical supply before installation and maintenance. The cabinets are suitable for Bathroom Zones 2, 3, and non-bathroom/dry areas. They are not suitable for installation in Saunas, Steam Rooms, or Shower Cubicles. The cabinets should not be connected to a plug and socket outlet and are rated IP44 for indoor use only. Do not fix them to damp or conductive surfaces and keep them away from curtains and fabrics. It is recommended to switch off the lights after use and not leave them on for prolonged periods.

For more detailed instructions and safety information, please refer to the Bojano LMGC Series LED Illuminated Aluminum Cabinets Installation Guide provided.