User Manual Q&AAnswer
Feb 20, 2025 - 10:23 PM
To add coolant or dye to your EK 200 Series Fluid Gaming Computer, follow these steps:
1. Ensure that you do not mix coolants. If you are topping off the coolant, use pure distilled water.
2. Disconnect all external cables, including the power cable, and remove all external panels from the chassis.
3. Stand the system upright on its back side and attach a tube to the lower port on the front of the reservoir.
4. Place the tube into an appropriate drain or container and put the system back on its feet.
5. Remove the plug from the fill port to allow the coolant to drain faster.
6. Tilt the chassis in every direction to remove as much coolant as possible.
7. Once the draining is complete, disconnect all external cables, including the power cable, and remove all external panels from the chassis.
8. Ensure that the drain port is sufficiently tightened.
9. Fill the reservoir through the top front port using the provided fill bottle.
10. Momentarily power on the system until the reservoir level drops enough to add more coolant. Repeat this step until the components are completely free of air.
11. If you are changing the color or type of coolant, repeat the draining and filling process with pure distilled water to obtain the most satisfactory result.
Please note that it is important to read the complete user guide for detailed instructions and safety precautions before performing any maintenance on your EK 200 Series Fluid Gaming Computer.
Add New Comment