User Manual Q&AAnswer
Feb 20, 2025 - 10:21 PM
To assemble the ALPINE MZP563 Corporation 46-in L Wood Park Bench, follow these steps:
1. Unpack all components carefully and ensure that all parts have been removed from the packaging.
2. Start by fitting the two bolts on the bottom of the Seat (A) into the tabs at the center bar of the Left Side Panel (B).
3. Insert the two bolts on the left side of the seat with the two upper tabs at the back of the side panel and the middle tab on the front Left Side Panel (B).
4. Place Cap Nuts (E) on the two bolts and tighten them securely with the Wrench (F).
5. Repeat the process with the Right Side Panel (C) on the right end of the Seat (A).
6. Align the bolts on the back corners of the Backrest (D) with the two tabs at the tops of the Left Side Panel (B) and Right Side Panel (C).
7. Place a Cap Nut (D) on each bolt and tighten them securely with the Wrench (E).
Congratulations! Your ALPINE MZP563 Corporation 46-in L Wood Park Bench is now completely assembled. Place it in a relaxing setting and enjoy!
Note: If you encounter any difficulties or have further questions during the assembly process, please contact the retail store where you purchased the bench for assistance.
Source: ALPINE MZP563 Corporation 46-in L Wood Park Bench Instruction Manual
Add New Comment