User Manual Q&AAnswer
Feb 20, 2025 - 09:45 PM
To use the VS SASSOON VS2165A Total Crimp Styler, follow these steps:
1. Before using the styler, remove all packaging and labels.
2. Wash, condition, and dry your hair as usual. Ensure your hair is combed through and tangle-free.
3. Plug the styler into a suitable power outlet (230-240V~).
4. Place the styler on a heat-protective, flat level surface.
5. Press the "I" button to turn on the styler. Both the red and green LED lights will flash.
6. Select the desired temperature setting using the temperature dial. Refer to the VARIABLE HEAT SETTINGS chart in the manual for guidance on choosing the right temperature for your hair type.
7. Wait for the styler to reach the optimum temperature. The indicator light will stop flashing and remain green.
8. Divide your hair into approximately 5cm sections, depending on the crimped hairstyle look you desire.
9. Place a section of hair between the crimping plates and hold it firmly for about 5 seconds.
10. Release the section of hair and re-position the styler so that the next crimp falls in line with the previous section. Use the cool touch ends to help align the styler on each section.
11. Always work from the root to the tips of your hair.
12. Repeat this process for all sections of hair until you achieve the desired crimped hairstyle.
13. After use, turn off the styler by pressing the "O" button until the red LED light turns off.
14. Allow the styler to cool down before storing it.
Please note that the styler is a high-heat appliance, so take care to avoid the hot surfaces of the styler coming into direct contact with your skin. Also, if your hair has been heavily bleached or chemically treated, use the low heat setting on the styler or consult your hairdresser for advice.
For more information and safety instructions, refer to the complete manual provided with the product.
Add New Comment