User Manual Q&AAnswer
Feb 20, 2025 - 09:41 PM
To remove the panels on the ENDORFY Signum 300 Solid PC Midi Tower, please follow these steps:
1. Make sure the PC tower is powered off and unplugged from the power source.
2. Locate the screws or fasteners holding the panels in place. These are typically located on the back or sides of the tower.
3. Use a screwdriver or appropriate tool to remove the screws or fasteners.
4. Gently slide or lift the panel away from the tower. Be careful not to force it or apply excessive pressure, as this may damage the panel or the tower.
5. Repeat the process for any additional panels you wish to remove.
Please refer to the manual for specific instructions and illustrations on panel removal for the ENDORFY Signum 300 Solid PC Midi Tower.
Add New Comment