How do I install and mount the Optoma DS-9084PMG Plus 84 Inch Diagonal 16:9 Manual Pull Down Projector Screen? (Optoma DS-9084PMG 84 Inch Projector Screen Owner's Manual)

Answer

manuals.plus

Feb 20, 2025 - 09:23 PM

To install and mount the Optoma DS-9084PMG Plus 84 Inch Diagonal 16:9 Manual Pull Down Projector Screen, please follow these steps:

1. Determine the desired location: Choose a suitable wall or ceiling location where you want to mount the screen. Ensure that the surface is sturdy and capable of supporting the weight of the screen.

2. Mark the mounting holes: Hold the screen casing against the wall or ceiling and mark the positions of the mounting holes using a pencil or marker. Make sure the screen is level and centered.

3. Prepare the mounting hardware: Depending on the type of surface you are mounting the screen on (wall or ceiling), gather the appropriate screws, anchors, or brackets. Refer to the user manual for specific details on the recommended mounting hardware.

4. Mount the screen: Use the marked positions as a guide and attach the mounting hardware to the wall or ceiling. Ensure that the hardware is securely fastened.

5. Attach the screen casing: Once the mounting hardware is in place, align the screen casing with the mounting holes and attach it securely using the provided screws or brackets.

6. Test the screen operation: Gently pull down the screen to its fully extended position and release it. The slow retraction mechanism should allow the screen to retract smoothly. Test the screen a few times to ensure it operates correctly.

7. Adjust screen positioning: The Optoma DS-9084PMG Plus screen offers limitless screen positioning. You can stop the screen at any desired height during extension. Adjust the screen height according to your preference.

Note: If you are unsure about the installation process or encounter any difficulties, it is recommended to consult a professional installer or contact Optoma customer support for assistance.