How do I properly clean and maintain the TRADGARDSTEKNIK NPS 35 Solid Fuel Heating Unit? (TRADGARDSTEKNIK NPS 35 Solid Fuel Heating Unit Instruction Manual)

Answer

manuals.plus

Feb 20, 2025 - 09:21 PM

Proper cleaning and maintenance of the TRADGARDSTEKNIK NPS 35 Solid Fuel Heating Unit is essential for its efficient and safe operation. Here are the steps to clean and maintain the heater:

1. Shut off the heater: Before starting any maintenance procedures, make sure to shut off the heater using the main switch and wait for the heat exchanger to cool down.

2. Cleaning the grid chamber: Regularly remove ash and slag from the grid grooves and chamber walls of the heater. This cleaning should be done each time the heater is started up. Use gloves, safety goggles, and head protection when cleaning. Ensure that children stay clear of the heater during this process.

3. Cleaning the exhaust ducts: The exhaust ducts, where volatile ashes gather, should be cleaned through the inspection openings every seven to fourteen days, depending on the fuel quality and humidity. Follow the instructions in the manual to access and clean the exhaust ducts properly.

4. Regular inspection: Periodically inspect the tightness of the chimney system, chimney connection, ventilator contact surfaces, and inspection openings. Also, check the manner of connection to the electric grid to ensure everything is in proper working order.

Remember to always disconnect the heater's power supply before performing any maintenance procedures. If you have any specific questions or concerns about cleaning and maintaining the TRADGARDSTEKNIK NPS 35 Solid Fuel Heating Unit, refer to the instruction manual or contact the manufacturer directly for further assistance.