User Manual Q&AAnswer
Feb 20, 2025 - 09:16 PM
To install the ANETA LIGHTING ALFA 15107 Ceiling Pendant directly to the supply cable, please follow these steps:
1. Turn off the power: Before starting any installation work, make sure to turn off the power supply to the area where you will be installing the pendant.
2. Prepare the pendant: Remove the packaging and carefully inspect the pendant for any damage. Make sure all the necessary components are included.
3. Mounting bracket: Attach the mounting bracket to the ceiling using screws or other appropriate hardware. Ensure that the bracket is securely fixed to the ceiling.
4. Wiring: Connect the supply cable to the pendant's luminaire socket. Please note that the luminaire socket is not included with the pendant and will need to be purchased separately.
5. Secure the pendant: Hang the pendant from the mounting bracket, ensuring that it is securely attached.
6. Electrical connections: Make sure to follow the appropriate electrical wiring regulations and guidelines for your location. If you are unsure about the electrical connections, it is recommended to consult a qualified electrician.
7. Power on and test: Once the pendant is securely installed and the electrical connections are made, turn on the power supply and test the pendant to ensure it is functioning properly.
Cleaning: To clean the pendant, simply wipe it with a dry cloth. Avoid using any abrasive or harsh cleaning agents, as they may damage the pendant's surface.
For more detailed instructions and safety precautions, please refer to the installation guide provided by ANETA LIGHTING or visit their website at www.aneta.se or www.aneta.no.
Please note that it is always recommended to consult the specific installation guide provided by the manufacturer for accurate and detailed instructions tailored to the ANETA LIGHTING ALFA 15107 Ceiling Pendant.
Add New Comment