User Manual Q&AAnswer
Feb 20, 2025 - 08:44 PM
To connect the D-2012C Remote Console Unit to the D-2008SP Digital Mixing Processor, you will need to perform the following steps:
1. Make sure both units are powered off before making any connections.
2. Locate the LAN connector on the rear panel of the D-2008SP Digital Mixing Processor.
3. Connect one end of an Ethernet cable to the LAN connector on the D-2008SP.
4. Locate the LAN connector on the rear panel of the D-2012C Remote Console Unit.
5. Connect the other end of the Ethernet cable to the LAN connector on the D-2012C.
6. Once the Ethernet cable is securely connected, you can power on both units.
7. The D-2012C Remote Console Unit should now be connected to the D-2008SP Digital Mixing Processor and ready for operation.
Please refer to the instruction manual for more detailed information on the connection process and for any additional setup steps that may be required.
Add New Comment