User Manual Q&AAnswer
Feb 20, 2025 - 08:39 PM
To change the charging current using the IMFsoft IMF-EV03 Charging Cable, follow these steps:
1. Plug in the cable into an electrical plug.
2. When inserted into an electrical plug, the blue LED will inform you of the value of the set current according to the number of flashes. A steady blue LED indicates readiness for charging.
3. By pressing the button on the cable, it is possible to change the charging current.
4. Immediately after pressing the button, the blue LED will go out and after 5 seconds, it will gradually inform you about the new value of the charging current.
5. Keep the button pressed until the desired current value is displayed and stored in memory.
6. After connecting the cable to the car, the blue LED will flash to indicate that charging is in progress. A steady blue LED indicates that the vehicle battery is fully charged.
Please note that the available charging options and their corresponding current and power values are provided in the manual. Choose the appropriate current option based on your vehicle's requirements and charging capabilities.
For further assistance or information, you can contact IMFsoft at info@imf.cz or call +420 596 611 977.
Add New Comment