User Manual Q&AAnswer
Feb 20, 2025 - 08:32 PM
To connect your tapo RV10 V1 Robot Vacuum and Mop Smart Auto-Empty Dock to Wi-Fi, please follow these step-by-step instructions:
1. Download the Tapo app from the App Store or Google Play and log in to your account.
2. Open the Tapo app and tap the "+" icon to add a new device.
3. Select your model, which is the tapo RV10 V1 Robot Vacuum and Mop Smart Auto-Empty Dock.
4. Follow the on-screen instructions to put your robot vacuum into setup mode. Press and hold the combination button on the robot vacuum for 5 seconds until the LED indicator starts flashing.
5. Once the LED indicator is flashing, tap "Next" in the app to proceed.
6. Connect your smartphone to the 2.4 GHz Wi-Fi network that you want to connect the robot vacuum to. Make sure your smartphone is connected to the same network that you want to connect the robot vacuum to.
7. In the app, select your Wi-Fi network from the list and enter the password. Tap "Next" to continue.
8. The app will now attempt to connect the robot vacuum to your Wi-Fi network. This may take a few moments. Please ensure that your Wi-Fi signal is strong and that you are within range of the router.
9. Once the robot vacuum is successfully connected to your Wi-Fi network, you will see a confirmation message in the app. Tap "Finish" to complete the setup process.
10. You can now control and monitor your tapo RV10 V1 Robot Vacuum and Mop Smart Auto-Empty Dock using the Tapo app.
If you encounter any issues during the setup process, please refer to the troubleshooting section in the manual or contact the TP-Link Technical Support for further assistance.
Add New Comment