User Manual Q&AAnswer
Feb 20, 2025 - 08:20 PM
To set the time and day on the Dimplex FutM2BT Electronic Thermostat Control with 7-Day Programmable Timer, follow these steps:
1. Plug in the thermostat control and wait for it to enter "Standby" mode (indicated by a red illuminated Standby button).
2. Press and hold the "Time" button for two seconds. The digits representing the days of the week (1-7) will start flashing.
3. Use the "+" or "-" buttons to select the current day of the week (1 corresponds to Monday, 2 to Tuesday, and so on).
4. Press the "Time" button to confirm the day selection.
5. The hour digits will start flashing. Use the "+" or "-" buttons to set the current hour and press the "Time" button to confirm.
6. The minute digits will flash. Use the "+" or "-" buttons to set the current minute and press the "Time" button to confirm.
7. The time is now set. The thermostat control will automatically exit the time setting mode and return to normal operation.
Note: If you experience a power interruption or disconnect the thermostat control for an extended period, the time and day settings may be lost. In such cases, you will need to repeat the above steps to set the time and day again.
Add New Comment