User Manual Q&AAnswer
Feb 20, 2025 - 08:16 PM
To change the charge profile on the Enerdrive ePOWER Industrial Battery Charger, you will need a formatted (FAT32) USB memory stick with a capacity of 1024KB or larger. Follow these steps:
1. Download and save the Battery Algorithm Listing from the website provided in the manual.
2. Open the downloaded file and select a charge profile that matches the batteries you are using from the "Charge Profile Listing" tab.
3. Right-click on the selected charge profile and click "Copy".
4. Paste the copied charge profile onto your formatted USB memory stick.
5. Ensure that the charger is not connected to the battery or AC power.
6. Unscrew the round cap covering the USB port on the front of the charger and insert the USB memory stick.
7. Plug the AC power cord into the charger and switch on the AC power.
8. Wait for up to 1 minute for the programming to complete. The USB status LED will be solid when programming is finished.
9. Switch off the AC power to the charger.
10. Remove the USB memory stick and xxxx the USB cap back on.
11. Switch on the AC power to the charger and check that the selected charge profile has been installed. The charger will display the installed charge profile as a series of flashes on the Battery Capacity LEDs.
12. Switch off the AC power to the charger.
13. Connect the charger to the DC battery.
14. Switch on the AC power to the charger to begin charging with the installed charge profile.
Please note that if you cannot find a suitable charge profile for your batteries, you can contact Enerdrive for assistance in creating a custom charge profile.
Add New Comment