User Manual Q&AAnswer
Feb 20, 2025 - 08:09 PM
To program the ADEMCO 2C2BPTRAN remote control to work with the receiver, follow these steps:
1. Connect the receiver to power. The LED on the receiver will light up.
2. Press the learn button on the receiver. The LED on the receiver will start flashing.
3. Within 30 seconds, press the button on the remote control that you want to program. The LED on the remote control will light up.
4. The LED on the receiver will flash faster and then light up, indicating that the receiver and remote control have been successfully matched.
Note: If you keep pressing the button on the remote control, the LED on the remote control will stay lit.
Please refer to the user manual for any additional information or troubleshooting steps.
Add New Comment