User Manual Q&AAnswer
Feb 20, 2025 - 08:07 PM
To inflate your car tires using the NORDIC AP-L0218 18v Li-ion Cordless Air Compressor Pump, follow these steps:
1. Ensure that the air pump is fully charged or connected to a power source.
2. Check the tire pressure recommended for your car. This information can usually be found in the car's manual or on a sticker located on the driver's side door jamb.
3. Attach the appropriate adapter to the valve connector of the air hose. The adapter should match the valve type of your car tires (usually Schrader valve).
4. Insert the connector adapter into the tire valve.
5. Turn on the air pump by using the trigger on the unit.
6. Monitor the pressure gauge on the air pump while inflating the tire. Stop inflating when the desired pressure is reached. The pressure can be read in either PSI or Bar on the gauge.
7. Once the desired pressure is reached, turn off the air pump and remove the connector adapter from the tire valve.
8. Repeat the process for each tire that needs to be inflated.
Note: It is important not to overinflate the tires. Check the tire pressure periodically during inflation using a reliable pressure gauge. The pressure gauge on the air pump is for reference only and may not provide exact values. Always refer to the recommended tire pressure for your car.
Add New Comment