User Manual Q&AAnswer
Feb 20, 2025 - 06:05 AM
To install the KEMPPI P45MT Transport Unit, please follow the steps below:
1. Ensure you have all the necessary parts mentioned in the instruction manual:
- 4 x M8x12 screws
- 8 x M8x16 screws
- 4 x M6x12 screws
- 8 x M8x16 screws
- 4 x M20 screws
- 4 x M8x40 screws
- 4 x M5x12 screws (for MIG)
- 4 x M5x12 screws (for TIG)
- 2 x M5x12 screws
2. Place the transport unit in the desired location where you want to install it.
3. Attach the transport unit to the welding machine by aligning the mounting holes on the transport unit with the corresponding holes on the welding machine.
4. Insert the appropriate screws into the holes and tighten them securely using the appropriate tools. Refer to the instruction manual for the specific xxxx sizes and locations.
5. Double-check that all screws are tightened properly to ensure stability and safety during transportation.
Note: It is important to refer to the instruction manual provided by KEMPPI for detailed diagrams and instructions specific to your model.
Add New Comment