User Manual Q&AAnswer
Feb 20, 2025 - 05:59 AM
To assemble and set up the SEALEY LED60230V 360° Slim Standing Smd Led Worklight, please follow these steps:
1. Unpack the worklight and ensure that all the components are present.
2. Extend the tripod stand to its full height by pulling the legs apart.
3. Attach the worklight head to the top of the tripod stand by aligning the mounting bracket on the worklight head with the tripod stand's mounting plate. Insert the mounting pin into the hole and secure it with the provided xxxx .
4. Connect the power cable to the worklight by inserting the plug into the socket located on the back of the worklight head.
5. Plug the other end of the power cable into a suitable power outlet.
6. Turn on the power supply to switch on the worklight.
7. Position the worklight in the desired area that requires illumination.
8. To turn off the worklight, switch off the power supply and disconnect the power cable from the outlet.
Note: Ensure that the worklight is disconnected from the mains power supply when not in use. Store the worklight in a cool, dry, and childproof area.
For further information and safety instructions, please refer to the SEALEY LED60230V 360° Slim Standing Smd Led Worklight Instruction Manual.
Add New Comment