User Manual Q&AAnswer
Feb 20, 2025 - 05:57 AM
To install the niko 350-34003 Motion Detector M34LR KNX 39-41 m 360° for Flushmounting Box, please follow the instructions provided in the instruction manual. Here is a step-by-step guide:
1. Ensure that you have the necessary accessories, such as the flush-mounting box and spring clips (which can be ordered separately).
2. Choose the desired location for installation. The mounting height should be between 2-3 meters.
3. Drill a hole with a diameter of 56mm in the chosen location.
4. Insert the motion detector into the flush-mounting box, ensuring that it is securely fitted.
5. Connect the wiring according to the provided wiring diagram in the manual. The motion detector is powered by a 30 Vdc input voltage via the KNX-bus.
6. Once the wiring is complete, configure the motion detector using the ETS software. The manual should provide detailed instructions on how to modify the settings.
7. After configuration, mount the flush-mounting box onto the wall, ensuring it is properly aligned.
8. Test the motion detector by activating the various applications, such as presence, lux, constant light switch, HVAC, and alarm.
Please note that this is a general guide, and it is essential to refer to the instruction manual for specific instructions and safety precautions.
Add New Comment