User Manual Q&AAnswer
Feb 20, 2025 - 05:20 AM
To install the Argos 6167105 Extra Tall Pressure Fit Pet Gate Extension Pack, please follow these steps:
1. Inspect the safety gate upon receipt to ensure there is no damage and all parts are included.
2. Place the gate between two clean and solid surfaces. Ensure appropriate fixings are used for drywall, wood, brick, etc.
3. If wall plugs are provided with the gate and do not secure to the wall satisfactorily, consult with a hardware store for the proper wall plug application.
4. If using the gate at the bottom of the stairs, place it towards the front of the lowest stair.
5. Use all four wall cups provided for maximum safety. Attach them to the wall using the sticky pads and screws provided.
6. Take out the plastic bolt plugs from the original 9561430 pet gate, which should have been pre-assembled.
7. Put on one or two extension bars according to the door width. Insert the plastic bolt plugs into the extension bar.
8. Follow the Installation Manual of the original 9561430 pet gate for further instructions on mounting the gate.
Note: It is important to read and follow all instructions provided in the manual for proper installation and usage of the gate. Additionally, make sure to regularly check the gate to ensure it is in proper working order and securely closed.
For any further assistance or if you require replacement parts, please contact your nearest Argos store or the Argos Customer Care Team using the provided contact information in the manual.
Add New Comment