User Manual Q&AAnswer
Feb 20, 2025 - 05:12 AM
To change the output mode of the iSMACONTROLLI SfAR-S-8AO 8 Analog Outputs Expansion Module from current to voltage, you will need to follow these steps:
1. Set the appropriate values of Modbus registers (40069-40076) using the Modbus protocol or the dedicated computer program.
2. Change the position of the jumper inside the module. The jumper is located inside the module and needs to be adjusted according to the instructions provided in the manual.
Please refer to the "Setting Output Mode" section of the user manual for more detailed instructions and illustrations on how to change the output mode.
Add New Comment