User Manual Q&AAnswer
Feb 20, 2025 - 04:05 AM
To connect your smartphone to the RUKO U11 Quadcopter, please follow these steps:
1. Download and install the RUKO-GPS app on your smartphone. You can scan the corresponding QR code provided in the user manual to download the app.
2. Turn on the controller and push the left stick down to the lowest position and let go. The light on the controller will go off slowly.
3. Turn on the drone and place it on a horizontal surface. Long press the power button for 2 seconds to start the drone. The front navigation light will flash and the rear navigation light will go out. At the same time, the remote control will make a "beep" sound.
4. Connect your smartphone to the Wi-Fi named "drone-******". The Wi-Fi name and password can be found on the drone or in the user manual.
5. Rotate the drone horizontally until the transmitter "beeps". This will complete the horizontal level correction.
6. Rotate the drone vertically until the transmitter "beeps". This will complete the vertical correction.
7. When the lights on the drone become spinning and flashing, the calibration is done.
Please note that you need to perform the calibration each time you start the drone for it to work normally. Also, make sure your smartphone has a strong GPS signal before flying outdoors for the return home function to work properly.
Add New Comment