User Manual Q&AAnswer
Feb 20, 2025 - 03:55 AM
1. Read the installation guide: Before starting the installation, it is important to thoroughly read and understand the installation guide provided by Sleipner Motor. This guide contains important information and guidelines for a successful installation.
2. Seek professional assistance if needed: If you are not skilled in this type of work, it is recommended to contact professional installers for assistance. Additionally, if required by local regulations, electrical work must be done by a licensed professional.
3. Considerations and precautions: Take note of the general installation considerations and precautions mentioned in the installation guide. These include not installing the thruster in a position that may jeopardize the hull integrity, painting the gear house and propellers with anti-fouling (excluding anodes, sealing, rubber fittings, and propeller shafts), and ensuring the thruster is never run out of water.
4. Installation of electric motor thrusters: If you are installing an electric motor thruster, make sure it is not installed in compartments that require ignition-proof electric equipment. If necessary, create a separate compartment. Ensure the compartment is well-ventilated for cooling of the electric motor. Follow the recommended measurements and guidelines for installation, including proper support for the motor if it is positioned more than 30 degrees off vertical.
5. Tunnel installation: Install the tunnel according to the instructions provided in the installation guide. This includes marking the tunnel centerline, cutting the hole for the tunnel opening, and casting the tunnel to the inside of the hull using fiberglass and resin. Pay attention to the recommended tunnel length and the rounding of tunnel ends for optimal performance.
6. Gear leg and motor bracket installation: Follow the instructions provided in the installation guide for installing the gear leg and motor bracket. This includes marking the tunnel centerline, drilling holes, and fastening the gear leg and motor bracket securely.
7. Propeller installation: Install the propeller onto the shaft spine, ensuring the drive pin aligns with the internal slot in the propeller. Tighten the propeller lock-nut and secure the anode with the holding xxxx .
8. Electrical installation: Follow the electrical installation guidelines provided in the installation guide. This includes selecting the appropriate cables, fuses, and battery capacity based on the specifications for your specific model. Install the main switch as close to the battery as possible and ensure all electrical connections are clean, dry, and tight.
9. Pre-delivery checklist: Before completing the installation, go through the pre-delivery checklist provided in the installation guide. This includes checking all bolts, electrical connections, anti-fouling application, propeller rotation, and potential water leakage.
10. Warranty and support: Register your product with Sleipner Group and familiarize yourself with the warranty terms and conditions. If you have any further questions or need support, contact your local professional dealer or visit the Sleipner Group website for additional resources.
Please note that this answer is a summary of the installation process and it is important to refer to the complete installation guide provided by Sleipner Motor for detailed instructions and specific guidelines for your model.
Add New Comment