User Manual Q&AAnswer
Feb 20, 2025 - 03:08 AM
Cleaning the filters of the AirExchange 750-T Anthracite Air Cleaning System is an important maintenance task to ensure optimal performance. Here is a step-by-step guide on how to clean the filters:
1. Turn off the unit and unplug it from the power source before attempting to clean the filters.
2. Locate the filter compartment on the back or side of the unit. The AirExchange 750-T Anthracite Air Cleaning System typically has a pre-filter and a HEPA filter.
3. Remove the pre-filter by gently pulling it out of the compartment. The pre-filter is washable and reusable.
4. Rinse the pre-filter under running water to remove dust and debris. Use mild soap if necessary. Allow the pre-filter to air dry completely before reinstalling it.
5. To clean the HEPA filter, gently vacuum the surface with a soft brush attachment to remove loose particles. Do not wash or wet the HEPA filter, as it may damage its effectiveness.
6. If the HEPA filter appears excessively dirty or clogged, it may need to be replaced. Refer to the product manual or contact the manufacturer for information on purchasing a replacement HEPA filter.
7. Once the filters are clean and dry, carefully reinstall them back into the filter compartment, ensuring they are properly aligned and securely in place.
8. Plug the unit back into the power source and turn it on. The AirExchange 750-T Anthracite Air Cleaning System is now ready to provide clean and purified air.
Note: It is recommended to clean the filters of the every 3-6 months, or more frequently if the unit is used in a particularly dusty or polluted environment. Regular filter maintenance will help maintain the unit's performance and prolong the lifespan of the filters.
Add New Comment