User Manual Q&AAnswer
Feb 20, 2025 - 02:33 AM
To install the MEDUNJESS FS2015-2432 KARA 24 in. W x 32 in. H Large Rectangular Frameless Anti Fog Wall Mount LED Light, please follow these steps:
1. Turn off the electricity supply mains before starting the installation to avoid the risk of electrocution.
2. Keep the plastic corner protectors on until the installation is fully completed to prevent damage to the mirror's edge.
3. Measure the distance of the mounting hole and drill holes in the wall using a suitable-sized drill.
4. Insert the anchor and mounting xxxx into the wall.
5. Connect the mirror wires with your main wires and hang the mounting hole onto the xxxx on the wall.
6. Peel off the protective film and clean the mirror with a soft cloth.
Note: It is important to keep the plastic corner protectors on until the installation is fully completed.
For power connection, the mirror comes with a 5 ft power cable that can be directly plugged into a switch for convenient use. Alternatively, it can be hardwired by cutting off the plug and controlling the ON/OFF of power via the wall switch. However, removing the plug connector will invalidate your product warranty.
Before starting the installation, make sure that the wall where the product is being installed can support the weight of the mirror and that the main electrical supply has been powered off.
To connect the wires, follow these guidelines:
- Green=GROUND wire connects to the ground wire in your box or to the box as a ground.
- White=Neutral wire connects to the White Neutral wire in your box.
- Black=LIVE wire connects to the Black LIVE wire in your box.
If you want to test the product function prior to installation, you can test it in any standard plug socket.
Please refer to the instruction manual for more detailed information and illustrations.
Add New Comment