User Manual Q&AAnswer
Feb 20, 2025 - 02:11 AM
To use the Chargers TH03 Magnetic 4 in 1 Wireless Fast Charger Dock, follow these steps:
1. Connect the transmitter USB cable to the charger dock.
2. If you have an iPhone 12/13 or a phone with a magnetic phone case, there is no need to align the device as it will automatically adsorb and start charging. If not, make sure to place the phone on the charging platform with the center of the receiving coil aligned with the center of the transmitting coil (±3mm deviation is allowed).
3. For the watch, simply place it in the charging position.
4. The power standby indicator (spaceman's eyes) will be on, and another color will be on when wireless charging is working. The indicator light will not turn off when the power is on. If a metal foreign body is detected, the indicator light will flash until the foreign body is removed.
5. The spaceman's head can be rotated from side to side at an angle of about 30 degrees.
6. To disassemble the spaceman, hold one leg and push it up against the base with your thumb.
7. To assemble the spaceman, aim at the base gap and press down until you hear a click sound.
8. The Chargers TH03 Magnetic 4 in 1 Wireless Fast Charger Dock has a maximum output of 15 watts for two mobile phones (or 1 mobile phone + 1 earphone) and a watch. It also has a 5V 1A USB-A interface for other digital products.
9. The charger dock is compatible with Apple Watch 1-7 generation and supports power adaptive charging. However, if the adapter power is insufficient, it will disconnect the charging to protect the device.
10. When the device is fully charged, it will keep the power at 100% for a certain period of time (supplementary charging).
11. It is recommended to use a QC protocol 9V 3A or PD protocol adapter and data cable with a current of 3A or above for optimal charging efficiency.
Please refer to the Chargers TH03 Magnetic 4 in 1 Wireless Fast Charger Dock User Guide for more detailed instructions and safety information.
Add New Comment