How do I start a wash cycle on Whirlpool Freestanding Washing Machine? (Whirlpool NSWM 965C Freestanding washing machine User Guide)

Answer

manuals.plus

Feb 20, 2025 - 02:10 AM


To start a wash cycle on the , follow these steps:

1. Press the ON/OFF button to turn on the washing machine. The START/PAUSE indicator light will flash slowly green.
2. Open the door and load the laundry into the drum, making sure not to exceed the maximum load quantity indicated in the wash cycle table.
3. Pull out the detergent dispenser drawer and pour the detergent into the relevant compartments, as described in the "DETERGENT DISPENSER DRAWER" section of the user guide.
4. Close the door.
5. Select the desired wash cycle using the WASH CYCLE SELECTOR  xxxx . Refer to the "WASH CYCLE TABLE" in the user guide for information on different wash cycles and their suitability for different types of garments.
6. Press the START/PAUSE button to start the wash cycle. The machine will lock the door and the drum will start to rotate. The door will unlock and then lock again as part of the preparation phase of each washing cycle. Water will enter the drum and the washing phase will begin once the door is locked.

Note: If you need to pause the wash cycle, press the START/PAUSE button again. To open the door while a cycle is in progress, press the START/PAUSE button to pause the cycle, and if the door symbol is off, the door can be opened. Press the START/PAUSE button again to continue the cycle.

For more detailed instructions and information on additional options and settings, please refer to the user guide provided with the Whirlpool NSWM 965C Freestanding Washing Machine.