User Manual Q&AAnswer
Feb 20, 2025 - 02:02 AM
To install the Finder 66 Series Power Relays 30A in a potentially explosive area, please follow these steps:
1. Verify that the relay has not been damaged during transport. If it is damaged, do not install it and immediately contact the transport service.
2. The installation must comply with the rules of the standard EN 60079-14 or the current national standards.
3. Before installing the relay in an explosive atmosphere, ensure that it is suitable for the classified area, considering the different inflammable substances present in the installation area. Verify the marking on the relay cover before installation.
4. The relay should only be installed by qualified personnel with knowledge of electrical apparatus for explosive gas atmospheres and electrical installations in hazardous areas.
5. Ensure that the relay and equipment are at a standstill, electrically dead, and locked against restart during installation.
Please refer to the manual for more detailed instructions and safety information specific to your model of the Finder 66 Series Power Relays 30A.
Add New Comment