User Manual Q&AAnswer
Feb 20, 2025 - 01:45 AM
To install the Chestertion LUBRI-CUP VG Series Automatic Lubrication Dispenser, follow these steps:
1. Start by removing any contaminants around the lube point and ensuring a clear passage using a manual grease gun. If there is any hardened grease, purge the lube point with a manual grease gun to remove it.
2. Remove the protector and turn the mode cap counterclockwise to unscrew the cap.
3. Press the MODE button firmly to activate the unit.
4. Use the MODE button to select the desired dispensing period. The Purge mode dispenses a large quantity of grease in less than an hour. After using the Purge mode, reset the unit to the desired dispensing period for further use.
5. Once the dispensing period is set, xxxx the mode cap back on.
6. Log the installation date and the scheduled date of the lube cycle completion on the label of the Lubri-Cup VG.
7. Install the Lubri-Cup VG unit on the lube point.
8. When the selected dispensing period of the Lubri-Cup VG has completed, remove the lubricator from the application.
9. Dispose of the unit in compliance with local regulations for waste or recycling. Do not cut, puncture, or reuse the lubricator. Do not change or recharge the battery.
Please refer to the Chestertion LUBRI-CUP VG Series Automatic Lubrication Dispenser Instruction Manual for more detailed instructions and safety precautions.
Add New Comment