How do I install the SDC 590 Monitoring Switch Kit? (SDC 590 Monitoring Switch Kit Instruction Manual)

Answer

manuals.plus

Feb 20, 2025 - 01:40 AM


To install the SDC 590 Monitoring Switch Kit, please follow these steps:

1. Begin by ensuring that the power to the system is turned off.
2. Locate a suitable mounting location for the monitoring switch. It should be placed in a position where it can easily monitor the desired door or access point.
3. Using the provided screws, mount the monitoring switch to the desired location.
4. Connect the monitoring switch to the power source using the provided power supply. Ensure that the power supply is compatible with the voltage requirements of the monitoring switch.
5. Connect the monitoring switch to the access control system or alarm panel using the provided wiring. Follow the wiring diagram provided in the instruction manual to ensure proper connections.
6. Once all connections are made, turn on the power to the system and test the functionality of the monitoring switch.
7. If the monitoring switch is functioning correctly, proceed to program and configure the access control system or alarm panel to recognize the monitoring switch and respond accordingly.

For more detailed instructions and diagrams, please refer to the SDC 590 Monitoring Switch Kit Instruction Manual available on the SDC Security website at www.sdcsecurity.com. If you have any further questions or need assistance, please contact SDC Security through their website or email engineer@sdcsecurity.com.