User Manual Q&AAnswer
Feb 20, 2025 - 01:10 AM
To properly crimp the Molex 0346750003 crimp housings, please follow the instructions provided in the user guide and refer to the Molex documentation for more detailed information. Here is a general step-by-step guide:
1. Prepare the wire: Strip the insulation from the end of the wire to expose the conductor. The length of the stripped portion should match the crimp housing's terminal length.
2. Insert the wire into the crimp housing: Insert the stripped end of the wire into the appropriate terminal cavity of the crimp housing. Ensure that the wire is fully inserted and reaches the bottom of the cavity.
3. Crimp the terminal: Use a suitable crimping tool to apply pressure to the crimp housing's terminal, securing the wire in place. Follow the recommended crimping specifications provided in the user guide or product specification.
4. Verify the crimp: After crimping, visually inspect the crimped terminal to ensure that it is properly formed and securely holding the wire. Check for any signs of damage or loose connections.
5. Repeat for additional wires: If you have multiple wires to crimp, repeat the above steps for each wire, ensuring proper insertion and crimping for each terminal.
It is important to note that the above instructions are a general guideline. For specific details and recommendations, please refer to the user guide and other documentation provided by Molex crimp housings.
Add New Comment