User Manual Q&AAnswer
Feb 20, 2025 - 12:59 AM
To charge a battery using the Fubag FORCE 140 Charger and Starter, please follow these steps:
1. Connect the charger to a power source using the power adapter provided.
2. Make sure the charger is turned off before connecting it to the battery.
3. Locate the positive (+) and negative (-) terminals on the battery.
4. Connect the positive (+) clamp of the charger to the positive (+) terminal of the battery.
5. Connect the negative (-) clamp of the charger to the negative (-) terminal of the battery.
6. Turn on the charger by pressing the power button.
7. The charger will automatically detect the battery voltage and start charging.
8. The indicator lamps on the charger will show the remaining capacity of the battery. If the lamps are blinking, it indicates that the battery may have malfunctioned.
9. Allow the battery to charge until it reaches the desired capacity. The charger will automatically stop charging when the battery is fully charged.
10. Once charging is complete, disconnect the charger from the battery by removing the clamps in the reverse order (negative clamp first, then positive clamp).
11. Turn off the charger and unplug it from the power source.
Please refer to the user manual provided for more detailed instructions and safety precautions.
Add New Comment