User Manual Q&AAnswer
Feb 20, 2025 - 12:56 AM
To mount the accessory on the VONROC RH505AC Cordless Rotary Hammer, follow these steps:
1. Switch off the machine and remove the mains plug from the mains.
2. Apply a few drops of oil to the shaft of the accessory.
3. Slide the locking sleeve to the rear.
4. Insert the accessory into the chuck.
5. Secure the accessory by turning it counter-clockwise until it locks into place.
6. Release the locking sleeve.
To remove the accessory from the VONROC RH505AC Cordless Rotary Hammer, follow these steps:
1. Switch off the machine and remove the mains plug from the mains.
2. Slide the locking sleeve to the rear.
3. Remove the accessory from the chuck.
4. Release the locking sleeve.
Please refer to the assembly section in the user manual for more detailed instructions and illustrations.
Add New Comment