User Manual Q&AAnswer
Feb 20, 2025 - 12:54 AM
To light the burners on the BORMANN BLG2800 Gas Stove, follow these steps:
1. Open the main gas valve.
2. Push the gas control xxxx in and turn it towards the MAX position (counter-clockwise) until you hear a click. This will light both the small and large burners. If you only want to use the small burner, release the gas control xxxx and turn it further to the MIN position.
3. To adjust the flame size, set the gas control xxxx to a suitable position between MAX (full flame size) and MIN (small flame size).
4. If the burners are burning improperly, you can adjust the air flow by adjusting the air damper inside the gas cooker, located under the control xxxx . After igniting the gas, adjust the air damper until slightly rounded, vigorous blue flames appear.
5. To turn off the burners, turn the gas control knobs back to the OFF position until you hear a click. Make sure the burner is put out and turn off the main gas valve as well.
Please refer to the BORMANN BLG2800 Gas Stove Instruction Manual for more detailed instructions and safety precautions.
Add New Comment