How do I install the Square Fine Black Handle Kit for the Fisher Paykel Refrigerator? (FISHER PAYKEL Refrigerator User Guide)

Answer

manuals.plus

Feb 20, 2025 - 12:52 AM


To install the Square Fine Black Handle Kit for the Fisher Paykel AHD5RD6121WB Refrigerator, please follow these steps:

1. Ensure that you have the necessary tools for installation, including a screwdriver and any additional hardware provided with the handle kit.

2. Start by removing any existing handles from the refrigerator. This may require unscrewing or detaching them according to the manufacturer's instructions.

3. Take the Square Fine Black Handle Kit and align it with the pre-drilled holes on the refrigerator door. Make sure the handle is positioned correctly and level.

4. Insert the screws provided with the handle kit into the pre-drilled holes. Use a screwdriver to tighten the screws securely, but be careful not to overtighten and damage the handle or the refrigerator door.

5. Repeat the process for the other side of the refrigerator door if the handle kit includes a pair of handles.

6. Once both handles are securely attached, give them a gentle tug to ensure they are properly installed and won't come loose during use.

Please note that these instructions are general guidelines, and it's always recommended to refer to the specific installation instructions provided with the Square Fine Black Handle Kit for your Fisher Paykel AHD5RD6121WB Refrigerator. If you encounter any difficulties or have further questions, it is advisable to contact Fisher & Paykel's Customer Care Centre for assistance.