User Manual Q&AAnswer
Feb 19, 2025 - 11:45 PM
To connect two standard Quick Connect Linesets using the MRCOOL NVCOUPLER Series No Vac Coupler, please follow these steps:
1. Select the size of the Quick Connect Lineset you want to lengthen (either ⅜ or ¾).
2. Choose a second standard Quick Connect Lineset with corresponding specifications for the combined connection.
3. Use a wrench to assemble the coupler with both F1 and F2 on the corresponding linesets. Make sure to xxxx the thread to the bottom until it stops.
4. Once the connection is complete, cover the F1, F2, and coupler connections with the grey insulating sleeve provided. This will help prevent condensation.
5. Slide the insulation sleeves together, ensuring that no copper wiring is exposed.
6. Secure the insulation sleeves in place using tape.
Please refer to the instruction manual for visual illustrations of the steps mentioned above.
Add New Comment