User Manual Q&AAnswer
Feb 19, 2025 - 11:40 PM
To connect the Paul Neuhaus IM-7484-95 Connecting Element for Q-Spider to a DC48 voltage/max.3A power source, please follow these steps:
1. Ensure that the power source is a DC48 voltage/max.3A power supply. Using a power supply with higher voltage or current may damage the connecting element or other components.
2. Locate the DC input port on the connecting element. It is usually labeled as "DC IN" or "Power Input."
3. Connect the positive (+) terminal of the power supply to the positive (+) terminal of the connecting element. This is typically indicated by a plus sign (+) or a red wire.
4. Connect the negative (-) terminal of the power supply to the negative (-) terminal of the connecting element. This is usually indicated by a minus sign (-) or a black wire.
5. Ensure that the connections are secure and tight. Loose connections may result in poor electrical contact or intermittent power supply.
6. Double-check the polarity of the connections. It is crucial to connect the positive and negative terminals correctly to avoid damaging the connecting element or causing a short circuit.
7. Once the connections are made, you can plug the power supply into a suitable power outlet.
Please note that the specific instructions may vary depending on the product model and design. It is always recommended to refer to the instruction manual provided by Paul Neuhaus for detailed and accurate information on connecting the IM-7484-95 Connecting Element for Q-Spider to a power source.
Add New Comment