User Manual Q&AAnswer
Feb 19, 2025 - 11:30 PM
To connect the MSB Premier DAC Module to your amplifier, follow these steps:
1. Identify the type of analog outputs you have on the DAC module. It offers both XLR balanced and RCA single-ended outputs.
2. Choose the appropriate output type based on your amplifier's input connections. If your amplifier has XLR balanced inputs, use the XLR outputs. If your amplifier has RCA inputs, use the RCA outputs.
3. Connect the chosen analog outputs from the DAC module to the corresponding inputs on your amplifier using high-quality interconnect cables.
4. Ensure that the volume control on the DAC module is set to an appropriate level. You can adjust the volume using the xxxx on the DAC module or the remote control.
5. Power on the DAC module and your amplifier.
6. Select the desired input on the DAC module using the input selection buttons or the remote control.
7. Start playing audio from your source device, and you should hear the sound through your amplifier.
Note: If you are using an external preamp, it is recommended to disable the volume control on the DAC module. This can be done in the setup menu by setting the volume to "Volume Off - Native" or "Volume Off - Optimized".
Add New Comment