User Manual Q&AAnswer
Feb 19, 2025 - 11:18 PM
To charge the RGB Critter Flashlight, follow these steps:
1. Insert the Critter Key into the End Cap and rotate it counterclockwise to unlock the flashlight.
2. Connect the micro-USB charging cable (included with your order) to the micro-USB port on the flashlight.
3. Plug the other end of the USB cable into a power source.
4. The RGB Critter button LEDs will pulse to indicate that the battery is charging.
5. When the battery is fully charged, the RGB Critter button LEDs will blink once every 10 seconds.
6. To check the battery charge level without the micro-USB cable connected, disconnect the cable and the main LED will show the corresponding color for the battery charge level.
Please refer to the "Charge via Micro-USB Port" section in the manual for more detailed instructions and visual demonstrations.
Add New Comment