User Manual Q&AAnswer
Feb 19, 2025 - 10:54 PM
To set the time on the anko HEG10LED Fan with Clock and Temperature Display, please follow these steps:
1. Plug in and switch on the fan.
2. Press and release the Time Adjustment Button to advance the minute hand by one minute. Each press and release will advance the minute hand.
3. If you want to advance the minute hand and hour hand rapidly, press and hold the Time Adjustment Button.
4. As the "hour" hand reaches the hour mark required, release the Time Adjustment Button to stop the rapid advancement.
5. Continue to press and release the Time Adjustment Button to advance the "minute" hand to the required minute setting.
6. Once set to the required time setting, do not press the Time Adjustment Button again, and the time setting will change back to "clock" mode indicated by the second hand starting to advance.
Note: The clock function has a battery back-up to keep the set time in memory. The internal battery is not accessible, replaceable, or serviceable.
Please refer to the user manual for more detailed instructions and safety precautions.
Add New Comment