User Manual Q&AAnswer
Feb 19, 2025 - 10:42 PM
To install the FISHER PAYKEL 25398 Toe Kick for Dual Install 30+24" Column Refrigerator and Freezer, please follow the steps below:
1. Ensure that you have the necessary tools for installation, including a screwdriver and any additional hardware provided with the toe kick.
2. Start by removing the existing toe kick, if applicable, from the bottom of the refrigerator and freezer units.
3. Align the FISHER PAYKEL 25398 Toe Kick with the bottom of the refrigerator and freezer units. Make sure it is centered and level.
4. Using the provided screws or other hardware, attach the toe kick to the units. Refer to the user manual or installation guide for specific instructions on the type of screws or hardware to use and the recommended installation method.
5. Once the toe kick is securely attached, ensure that it is properly aligned and level with the units.
6. Double-check all connections and tighten any loose screws or hardware.
7. Test the toe kick by gently pushing on it to ensure it is securely in place.
Please note that the above instructions are a general guide and may vary depending on the specific model and installation requirements. It is always recommended to refer to the user manual or contact Fisher & Paykel's Customer Care Centre for detailed and model-specific installation instructions.
Add New Comment