User Manual Q&AAnswer
Feb 19, 2025 - 10:40 PM
To charge your devices using the ANKER A1289 737 Power Bank, follow these steps:
1. Connect your device to the power bank using a compatible charging cable. The power bank has two USB-C ports and one USB-A port, so choose the appropriate port for your device.
2. Once connected, the power bank will automatically start charging your device. You can check the battery level of the power bank and the charging status on the LCD screen.
3. If your device supports fast charging, make sure to use a compatible cable and connect it to one of the USB-C ports for optimal charging speed.
4. Keep your device connected until it reaches the desired battery level or until it is fully charged. The power bank will automatically stop charging your device once it is fully charged.
Note: The power bank has a total output of 140W, so it can charge multiple devices simultaneously. However, the charging speed may vary depending on the number of devices connected and their power requirements.
For more information and troubleshooting tips, you can refer to the user guide provided with the ANKER A1289 737 Power Bank or visit the ANKER support website at anker.com/support.
Add New Comment