User Manual Q&AAnswer
Feb 19, 2025 - 10:38 PM
Sure! Here is a step-by-step guide on how to install the ARMANOV SP01 Magazine Base Pad:
1. Start by removing the original base pad from your magazine. This can usually be done by pushing down on the base pad and sliding it off.
2. Take the locking plate provided with the ARMANOV SP01 Magazine Base Pad and attach it to the magazine. The locking plate should fit snugly onto the bottom of the magazine.
3. If possible, guide the magazine spring through the indented hole in the locking plate. This will help ensure proper alignment and stability.
4. Press down on the locking plate and slide the base pad onto the magazine from the front side. It is important to hold the locking plate in place using your thumb while doing this step.
5. Push the base pad until you hear a click. This indicates that the base pad is securely attached to the magazine.
6. Finally, make sure that you have pushed the base pad all the way until the locking plate falls inside the pad. This ensures a proper fit and prevents any movement or detachment during use.
Please note that the illustrations in the manual may appear slightly different from your specific magazine and base pad model. However, the installation process should be similar. If you encounter any difficulties or have further questions, it is recommended to refer to the instruction manual provided with your ARMANOV SP01 Magazine Base Pad or contact the manufacturer for assistance.
Add New Comment