User Manual Q&AAnswer
Feb 19, 2025 - 10:10 PM
To operate the bimar ND-18D3CL Electrical Fireplace, follow these steps:
1. Make sure the appliance is in good condition and the electric cord is not damaged.
2. Insert the plug into the socket.
3. Open the drawer.
4. Press the light switch (3) to activate the flame effect. Adjust the flame light intensity by turning the xxxx (2) clockwise for maximum intensity.
5. The fan heater is active only if the switch (3) is in position "I" and the xxxx (2) is turned to the maximum position.
6. To operate the fan only, press the switch (3) and adjust the xxxx (1).
7. To operate the heater, press the switches (4) and (5). Press switch (4) for warm air at 900W and press both switches (4) and (5) for hot air at 1800W.
8. Use the thermostat xxxx to regulate the appliance based on the surrounding ambient temperature. Turn the xxxx fully clockwise for maximum temperature and turn it fully anticlockwise to keep the fan heater off.
9. To completely switch off the appliance, press all the switches on the side opposite to "I" and "II" and remove the plug from the socket.
Please refer to the instruction manual for more detailed information and safety precautions.
Add New Comment