User Manual Q&AAnswer
Feb 19, 2025 - 10:02 PM
Installation of the Continental Edison CE600DBL4 Tilt and swivel double arm TV wall mount is relatively straightforward. Here are the step-by-step instructions:
1. Prepare the necessary tools: You will need a drill, a level, a screwdriver, a pencil, and a measuring tape.
2. Choose the location: Select a suitable location on the wall where you want to mount your TV. Ensure that the wall can support the weight of both the TV and the wall mount.
3. Attach the wall plate: Hold the wall plate against the wall at the desired height and mark the positions of the mounting holes with a pencil. Use a drill to create pilot holes at the marked positions, and then attach the wall plate securely to the wall using the provided screws.
4. Attach the TV brackets: Depending on the size and weight of your TV, you may need to use different sets of brackets. Refer to the user manual to determine the appropriate brackets for your TV. Attach the brackets to the back of your TV using the provided screws.
5. Connect the TV brackets to the wall plate: Align the TV brackets with the corresponding slots on the wall plate. Slide the TV brackets into the slots and secure them in place using the provided screws.
6. Adjust the tilt and swivel: Once the TV is securely mounted, you can adjust the tilt and swivel angles to achieve the desired viewing position. Use the adjustment knobs or levers located on the wall mount to make these adjustments.
7. Test the stability: Gently shake the TV to ensure that it is securely mounted and does not wobble. If necessary, double-check the tightness of the screws and make any adjustments as needed.
Please note that these instructions are a general guide, and it is important to refer to the specific instructions provided in the user manual for your Continental Edison CE600DBL4 Tilt and swivel double arm TV wall mount for any additional details or specifications.
Add New Comment