User Manual Q&AAnswer
Feb 19, 2025 - 09:48 PM
To install the stands for your INSIGNIA NS-32F202NA23 42 Inch LED Smart TV, follow these steps:
1. Place your TV face-down on a cushioned, clean surface.
2. Align the TV stand xxxx holes with the holes on your TV's bottom.
3. Use a Phillips screwdriver and two of the provided screws to secure each stand to your TV.
If you prefer to mount your TV on a wall, follow these steps:
1. Before mounting your TV, make sure to remove the stands.
2. Ensure that the wall-mount bracket you have supports the weight of your TV. Refer to the instructions that came with your wall mount for proper mounting instructions.
3. Important: Your TV has four VESA mounting holes on the back. It is crucial to secure a wall-mount bracket to all four holes. Failure to do so may result in the TV falling and causing damage or injury.
4. Note that wall-mount screws are not included.
- For the 32" model, the VESA mounting pattern is 100 × 100 mm, and you will need screws of type M4, 10 mm to a minimum length depending on the wall mount.
- For the 42" model, the VESA mounting pattern is 200 × 100 mm, and you will need screws of type M6, 10 mm to a minimum length depending on the wall mount.
Please refer to the user guide for additional information and illustrations on installing the stands or wall mount for your specific TV model.
Add New Comment