User Manual Q&AAnswer
Feb 19, 2025 - 09:38 PM
To assemble the Sage SJE830 Nutri Juicer Cold XL, follow these steps:
1. Place the motor base on a flat, dry surface.
2. Attach the filter bowl surround on top of the motor base.
3. Align the arrows on the stainless steel filter basket with the arrows on the motor drive coupling. Push down until it clicks into place.
4. Position the juicer cover over the filter bowl surround, aligning the lower part of the feed chute with the filter basket.
5. Make sure the safety locking arm is in a vertical position and locked into place on top of the juicer cover.
6. Slide the food pusher down the food chute, aligning the groove in the food pusher with the small protrusion on the inside of the top of the feed tube.
7. Insert the pulp container under the juicer cover on the back, ensuring it is supported by the juicer cover and motor base.
8. Fit the lid to the juice jug and position the jug under the juice spout.
Please refer to the user manual for visual illustrations and additional information on assembly.
Note: It is important to properly assemble the juicer before use, as it will not operate unless properly assembled.
Add New Comment