User Manual Q&AAnswer
Feb 19, 2025 - 09:36 PM
To connect the TRIPP-LITE RJ45 Hardened Gigabit Copper to Fiber Media Converter to your network, please follow these steps:
1. Using Cat5e/6 cable, connect the RJ45 port on the media converter to your network.
2. Connect a transceiver (such as Tripp Lite’s N286-Series) to the open SFP port on the media converter.
3. Connect fiber cabling matching the transceiver type to the transceiver’s port, as well as a second matching transceiver and media converter.
4. Using Cat5e/6 cable, connect the RJ45 port on the second media converter to your network device (workstation, hub, switch, etc.).
5. Connect the external power supplies included with each media converter and plug them into a power source.
Please refer to the "Installation" section of the user guide for more detailed instructions and illustrations.
Add New Comment